Neptune Systems

VORTECH/RADION WIRELESS EXPANSION MODULE :: WXM GET COMPLETE CONTROL OVER YOUR ECOTECH VORTECH PUMPS AND RADION LED – AND THE POSSIBILITIES ARE ENDLESS! EcoTech VorTech pumps are one of the most widely used, and loved, pieces of aquarium gear on the market today. As great as they are though, sometimes you just want to get a bit more control over them. With this module, your Apex will become the taskmaster telling your pumps exactly what to do based on time of day, feed mode, power outage mode, and just about any other thing you can can come up with. Add to that the ability to also control your EcoTech Radion marine LED lights and now you really have control.  SUPPORTS UP TO 11 VORTECH PUMPS OR RADION LED SIMULTANEOUSLY! Complete wireless control of up to 11 individual wireless VorTech pumps or Radion LED. You can even mix and match control across multiple tanks. Imagine having complete control over the MP40s and Radions in your 210 gallon display tank, while at the same time controlling the MP10 you have in the frag tank right next to it. SUPPORTS ALL BUILT-IN VORTECH PUMP MODES Turn on whatever pump mode you like, at will or at any time of the day. An example programming might be: Tidal Swell in the morning, followed by a strong Nutrient Transport Mode for a couple of hours to stir up detritus, followed by Random Reef Crest for a few hours, then at night when the lights go out, put it in a calm Lagoonal Mode until the next morning where it starts all over again! APEX + VORTECHS = INSANE FEED MODE! It’s super easy to set up a feed mode in the Apex that shuts off the return pump and skimmer, and then puts the Vortech in Nutrient Transport Mode for 30 minutes. Now you feed the fish and the food goes everywhere but in the sump! After 30 minutes, the VorTechs go back to their normal program, the return pump goes back on, then the skimmer waits five minutes more before coming on so you don’t have to worry about overflowing your skimmer. How’s that for automation? SHOW OFF THE WAVE ACTION WITH A TOUCH OF YOUR MOBILE DEVICE Sometimes it seems we all put far too much money into our aquarium systems and so it stands to reason that there are times we just want to show it all off! With the Apex and the VorTechs together you can show off some serious wave action with a simple touch of your iPad or Android device…from clear across the room!

Read more less

An elegant and highly refined solution to two-part/liquid storage, the DOS Dual Reservoir's advanced features are Apex Ready! Features: Large Storage Capacity - Each vessel holds up to 2 liters of fluid for a total storage volume of 4 litersConnects directly to your DOS dosing systemEngineered with a low center of gravity to help avoid tips and spillsOptical sensors provide real-time fluid levels to the Apex Fusion dashboardEasily removable lids to make refills a breezeBuilt using cast acrylicPush-fit tubing connections Specifications:Dimensions (approx) - 10.5" x 8.5" x 5.5"Capacity - 2000ml per side (0.52 gallons)Apex, Apex Lite, or Apex Jr. and DOS dosing system required to operate level sensors What's in the Box?DDR with sensors and cable4 meters of tubingGetting Started Guide

Read more less

Use With or Without an Apex Controller! The intelligent Neptune COR-20 Return Pump is easily the smartest pump available. Directly connecting to any Apex controller through an Aquabus Port, but if you do not have a controller, don't worry, you don't need one! COR pumps come standard with advanced control features that can be found by using the Apex Fusion Cloud Software (Apex required). Add a COR pump to your system today to see the difference. IQ-Level Technology Energy Efficient Extremely Quiet AquaBus Communication Connection Temperature Monitoring Up to 2000 GPH Internal or External   Don't have an Apex? No Problem! The COR-20 can be connected to an Apex, but it can also be used in a standalone method, where the controller lets you have simple control over the pump like, increasing and decreasing the speed as desired. Connecting the COR-20 to an Apex Controller can unlock much more potential!   Advanced Control The COR pumps were built from the ground up with control in mind. Have power over everything including the CORs output percentage, real-time operational feedback, compared feed routines, pump status can all be monitored and controlled with Apex Fusion. Once the COR pump is plugged into a 1Link port, and after a couple button presses you can set the pumps flow rate and feed mode settings. By enabling IQ-Level, you can set the min and max flow rates for your aquarium.    Up to 2000GPH The powerful COR-20 can push up to 2000 gallons per hour with an incredibly efficient head-loss curve. Each pump comes with multiple different output fittings that let you adapt the COR pumps output to match your reef tanks current plumbing size. It is suggested to use the largest 1.25" Union that is included, but it is totally fine to use the other 0.75" or 1.0" adapters if needed.    IQ-Level Technology Because not all aquariums are alike, Neptune Systems included IQ-Level technology with every COR pump. Customize the minimum and maximum speed settings for your tanks plumbing to the ideal flow rate, but also the minimum flow rate for in tank flow and feed modes as well.    Whisper Quiet Neptune's COR uses the latest in Vector Control, BLDC motor technology. Driving the COR pump in a way that is super energy efficient using less than 50W at full power, and staying vibration and noise free.    Operational Feedback Know what is going on with your pump at all times. COR pumps come loaded with features that let you monitor your aquariums "heart" giving you the chance to fix something before it fails. Saltwater aquariums are notorious for creating calcium and other mineral build up on pumps and there internal parts that can inhibit the flow but more importantly could cause damage to the pump. Neptune Fusion lets you monitor the pumps internal temperature along with its wattage draw and flow rate allowing you to set alarms and alerts if something goes out of their normal thresholds. If the temperature of the pump increases to unsafe levels, the COR will actually slow itself down until temperatures reach a safe level again, giving you time to react and maintain the pump.   Compatible with any Apex Controller (requires Aquabus port)   Specifications: Pump Dimensions - 3.875" W x 4.875" H x 6.250" D Driver Dimensions - 3" W x 4" H x 1" D Max Flow - 2000 GPH Max Head - 20FT Input Size - 1" Slip PVC Output Size - 3/4" Slip PVC or 1 1/4" Slip to BSPP Union Power Consumption - Less than 90W @ 120VAC   What's Included? 1x COR-20 Pump Body 1x COR Driver Controller 1x 100W DC Power Supply 1x 1.25" PVC Union (slip to BSPP) 1x 1" Slip Fitting 1x 0.75" Slip Fitting 1x 3-foot Aquabus Cable   Some features require Apex Controller System

Read more less

Connects to any Neptune 1Link or EB832! The intelligent Neptune COR-15 Return Pump is easily the smartest pump available. Directly connecting to any Neptune EnergyBar832 or 1Link module, you no longer have bulky power adapters or wall warts to power the COR pumps saving you outlet space and making cord management easier to work with. COR pumps come standard with advanced control features that can be found by using the Apex Fusion Cloud Software. Add a COR pump to your system today to see the difference. IQ-Level Technology Energy Efficient Extremely Quiet 1Link Power Connection Temperature Monitoring Up to 1500 GPH Internal or External No Power Bricks   COR-15 Requires Apex Controller. Don't have an Apex? Check out the Neptune Systems COR-20.   Advanced Control The COR pumps were built from the ground up with control in mind. Have power over everything including the CORs output percentage, real-time operational feedback, compared feed routines, pump status can all be monitored and controlled with Apex Fusion. Once the COR pump is plugged into a 1Link port, and after a couple button presses you can set the pumps flow rate and feed mode settings. By enabling IQ-Level, you can set the min and max flow rates for your aquarium.    Up to 1500GPH The powerful COR-15 can push up to 1500 gallons per hour with an incredibly efficient head-loss curve. Each pump comes with multiple different output fittings that let you adapt the COR pumps output to match your reef tanks current plumbing size. It is suggested to use the largest 1.25" Union that is included, but it is totally fine to use the other 0.75" or 1.0" adapters if needed.    IQ-Level Technology Because not all aquariums are alike, Neptune Systems included IQ-Level technology with every COR pump. Customize the minimum and maximum speed settings for your tanks plumbing to the ideal flow rate, but also the minimum flow rate for in tank flow and feed modes as well.    Whisper Quiet Neptune's COR uses the latest in Vector Control, BLDC motor technology. Driving the COR pump in a way that is super energy efficient using less than 50W at full power, and staying vibration and noise free.    Operational Feedback Know what is going on with your pump at all times. COR pumps come loaded with features that let you monitor your aquariums "heart" giving you the chance to fix something before it fails. Saltwater aquariums are notorious for creating calcium and other mineral build-up on pumps and there internal parts that can inhibit the flow but more importantly could cause damage to the pump. Neptune Fusion lets you monitor the pumps internal temperature along with its wattage draw and flow rate allowing you to set alarms and alerts if something goes out of their normal thresholds. If the temperature of the pump increases to unsafe levels, the COR will actually slow itself down until temperatures reach a safe level again, giving you time to react and maintain the pump.   Compatible with any Apex Controller (requires 1Link port) Don't have a 1Link port on your Apex System? Check out the Neptune 1Link Module Need a longer 1Link Cable? Check out the 1Link Extension Cable   Specifications: Pump Dimensions - 3.875" W x 4.875" H x 6.250" D Driver Dimensions - 3" W x 4" H x 1" D Max Flow - 1500 GPH Max Head - 14FT Input Size - 1" Slip PVC Output Size - 3/4" Slip PVC or 1 1/4" Slip to BSPP Union Power Consumption - Less than 50W @ 120VAC   What's Included? 1x COR-15 Pump Body 1x COR Driver Controller 1x 1.25" PVC Union (slip to BSPP) 1x 1" Slip Fitting 1x 0.75" Slip Fitting 1x 4-meter (13-foot) 1Link Cable   Requires 1Link Port & Apex Controller for use. 

Read more less

So Much More Than Just a Power Strip! The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It is obvious that this component is key to controlling things on your aquarium, but what is not so apparent is how it is critical to preventing catastrophe in your aquarium Energy Bar 4 Designed for a USA-style 120V power grid. Four controllable outlets. All outlets are controlled by high-current mechanical relays. Three of the outlets are rated at 8A and one outlet is rated at 12A. Each Energy Bar can consume a total of 15A  and has a built-in 15A circuit breaker. Four AquaBus connectors so you will have three free to connect to more modules or Energy Bars Energy Bar 8 Designed for a USA-style 120V power grid. Eight controllable outlets. Six of these outlets are controlled by super-silent solid-state triacs and are rated at 5A. Two of the outlets are controlled by high-current mechanical relays and are rated at 10A. Each Energy Bar can consume a total of 15A  and has a built-in 15A circuit breaker. Six AquaBus connectors so you will have five free to connect to more modules or Energy Bars The Energy Bar 832 has been completely redesigned, with more robust outlets, individual LEDs show the status of each outlet, per outlet power consumption, and 1Link Accessories like the DOS and WAV pump can now connect directly to the Energy Bar 832 saving room, and eliminating messy cords keeping your tanks equipment looking perfect. 8 Relayed Outlets Up to 3 WAV pumps 2x 24VDC accessories Powers other 1Link Accessories Individual outlet power consumption   Dimension - Energy Bar 832 - 10" L x 6.5" H x 2.25" W   Not compatible with Classic Apex Controller Systems.   Energy Bar 832 The completely redesigned Energy Bar 832 now has eight individual, 7 amp relayed outlets letting you use any outlet for any device. Each individual outlet can also monitor and detect power usage in amps or watts, letting you set alarms and send emails when pumps have clogged or failed, lights are not turning on, heaters leaking current, letting you be notified of the issue before it becomes a problem. With electricity costing more and more money per Kilowatt hour having the ability to monitor each pump, heater, and light lets you now make better decisions on the overall value of your equipment.   Each Energy Bar 832 is equipped with two 24VDC accessory ports that can power small pumps, solenoids, fans and more, while the built in 100W DC power supply lets you control up to 3 1Link accessories like the WAV circulation pumps, and DOS fluid metering system without the need of any additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless.   Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug in almost anything you want, where you want.   Whats Included? 1x Energy Bar 832 1x 3ft Aquabus Cable   Note: The Energy Bar 832 is not compatible with Classic Apex Controller Systems.

Read more less

AUTOMATIC FEEDING SYSTEM :: AFS Feed your fish consistently, and safely, while home or away.  A key component of caring for aquatic animals is regularly providing them with food, but in amounts that get consumed immediately so as not to pollute the aquarium. On top of that, most species do best when they are fed all throughout the day.  However, overfeeding of aquariums is one of the top reasons for water pollution and tank failures. FEED PELLET, FLAKE, OR OUR CROSSOVER DIET Of course the AFS was designed to feed almost any correctly-sized pellet or flake food. But the ideal food for the AFS is the Crossover Diet pellet food by Neptune Systems.  We’ve worked closely with Reed Mariculture (the manufacturer of Reef Nutrition foods) to come up with exclusive new food based on their TDO Chroma Boost that would dispense in consistent quantities from the AFS and bring out the vibrant colors in your fish. BUILD COMPLEX FEEDING ROUTINES WITH THE APEX AND THE AFS Since your AFS is part of the Apex ecosystem, you can build automated feeding routines that really do all the work for you. Imagine kicking off a symphony of operations on a timed schedule, like this: Turn off skimmer Turn off return pump(s) Set VorTech pumps to Tidal Surge Dim LED lights to 40% Wait 5 minutes AFS feed cycle AFS feed cycle Wait 10 minutes Turn on return pump(s) Wait 10 minutes Turn on skimmer Turn LED lights back to normal STAY-DRY SYSTEM PREVENTS CAKING AND CLUMPING A common issue for most aquarium autofeeders is moisture getting into the food, making it clump or cake and clogging up. The AFS has a motorized food delivery system that automatically extends and retracts into the housing for each feeding. And, the food container has a built-in gasket that seals out all moisture once it is retracted. Pretty cool, huh!? AWARD WINNING • Reef Builders: 10 Best Products of 2013• Reef Builders: AFS is the Hobby’s First Controllable Fish Feeder

Read more less

The Apex Display module is a sleek and compact way for your to interact with the Apex Base Unit and control nearly every aspect of your Aquarium. Mechanical, not membrane keypad Our Display Module uses high-quality, mechanical buttons. So what you say? Well many devices out there make use of what are called capacitive touch pads. This type of membrane button is just fine for your toaster oven, but in a saltwater environment it is highly susceptible to failure. So, even though the cost to us was higher, we went with mechanical buttons for our Display Module ensuring your product a much longer life. Adjustable contrast, high-resolution,backlit graphic display While some may tout the importance of a color display, we disagree. We believe the most important thing for our customers is ease in readability and size of the display. What good is a color display if it is barely larger than a postage stamp. That is why we went with the backlit graphical display we did. It was the perfect match of function and value for our customers. Built-In Speaker Plays Multiple Alarm Tones Inside the Apex Display Module is a tiny speaker with a big heart. This speaker will play one of many alarm sounds and tunes that are built into the Apex. These alarms are perfect to alert you of a water leak, over temp, or whatever you condition you desire to program into the Apex. Multiple Display Module Capability With the Apex Display Module you are not limited to having just one control panel. With the Apex (as an option) you can add one, two, even three control panels all to the same Apex. And, these are not watered down, smaller versions of the main control panel, all modules will have the same display and functionality.

Read more less

Neptune has put together a package that included the salinity, temp, pH and ORP probes, along with WiFi connectivity all in a single package. The Apex Controller is by far one of the most advanced dedicated aquarium controllers on the market today. The wide variety of controllability with the Apex Controller System and its easy to use cloud interface makes it a perfect option for a fully automated reef tank. The Apex Controller has two different methods of control, through Fusion, the cloud-based software, and through the dashboard. The dashboard lets you always have access to your Apex in any type of event, power outage, or if the internet is down through a local area network (LAN), unlike many other cloud-based controllers. The Energy Bar 832 can also tell you how much power each individual outlet is consuming letting you set alarms, send emails, or even have IOS notifications let you know before things go wrong.   Less Hassle, More Success More than the color has changed. Neptune has listened to what you want, adding more standard features to the already reliable, and dependable Apex Controller. Built in WiFi, Salinity, Temperature, pH, monitoring. Set reminders, log testing and dosing information and much more Included WiFi lets you now connect to the internet even easier. With the Fusion Cloud interface everything is easier from calibrating probes, to customizing outlets. Fusion gives you the ability to monitor and control you Apex from anywhere in the world. The Energy Bars have been completely redesigned, with more robust outlets, individual LEDs show the status of each outlet, per outlet power consumption, and 1Link Accessories like the DOS and WAV pump can now connect directly to the Energy Bar 832 saving room, and eliminating messy cords keeping your tanks equipment looking perfect. Monitor and Control Temperature Salinity pH Outlets 24VDC accessories WAV pumps Individual outlet power consumption   What’s Included? 1x  Apex Control Head Unit1x Energy Bar 832 1x 6 ft Aquabus Cable 1x Lab Grade Salinity Probe 1x Lab Grade Double Junction pH Probe 1x Lab Grade Double Junction ORP Probe 1x Temperature ProbeSalinity and pH calibration solutions   Apex Control System The new Apex's Head Unit now includes the ability to have salinity monitoring, pH, ORP, and Temperature monitoring right out of the box. The completely new design also incorporates a sleek, rotating mounting system letting you securely mount the brains of the Apex system while having easy access to probe cords, and aquabus connections.   Built in reliable WiFi Now with built-in WiFi, connecting your Apex system has never been easier. With the totally free Fusion cloud based software, getting connected, and controlling can be done within minutes. You can now do firmware updates through WiFi on your local network   Energy Bar 832 The most comprehensive aquarium controlling and monitoring system to date is finally here. The Energy Bar 832 now has eight individual, 7 amp relayed outlets letting you use any outlet for any device. Each individual outlet can also monitor and detect power usage in amps or watts, letting you set alarms and send emails when pumps have clogged or failed, lights are not turning on, heaters leaking current, letting you be notified of the issue before it becomes a problem. With electricity costing more and more money per Kilowatt hour having the ability to monitor each pump, heater, and light lets you now make better decisions on the overall value of your equipment. Each Energy Bar 832 also has two 24VDC accessory ports that can power small pumps, solenoids, fans and more, while the built-in 100W DC power supply lets you control up to 3 1Link accessories like the WAV circulation pumps, and DOS fluid metering system without the need for any additional power supplies or consuming additional outlets. The EB832 also has 3 AquaHub connections letting you expand to any existing or upcoming module making your Apex System truly limitless. Neptune didn't stop there, with an all new mounting system on the Energy Bar orients the power strip in the correct direction keeping cords neat and tidy. While the outlets have a bit wider spacing, and orientated opposite of each other keeping room for those bulky transformers, allowing you to plug in almost anything you want, where you want.   New Lab Grade, Double Junction Probes with Built-in Salinity Monitoring Double junction pH, and ORP probes lets your readings stay more stable without the need to calibrate as often. With the Apex System calibrating your probes through your dashboard is easier than ever before. The dashboard will automatically recognize when your readings have stabilized and letting you know when to move to the next step, no more guesswork and reading RAW data.   Apex Fusion Fusion is a cloud-based site that lets you access your Apex from anywhere in the world. Letting you customize outlets, set reminders, log testing parameters, while monitoring and controlling any aspect of your aquarium through your phone, tablet, or desktop.   Apex Fusion has released an IOS app that now integrates directly with your Apex Controller System. Having the app now lets your Apple desktop, Ipad, or phone receive notifications directly from your Apex Controller. No more need for emails or text messages. (Android app coming soon)   Backwards Compatible If you have any old modules, head units, energy bars, or other Apex accessories they will work flawlessly with the new Apex Controller.   Dimension Head Unit - 4.75" L x 5.25" H x 3.25" W Energy Bar 832 - 10" L x 6.5" H x 2.25" W   Note: Apex Display Module, Smart Phone, and Tablet not included.

Read more less

Description Neptune Systems Magnetic Probe Rack Features – MPR: Organizes up to four probes Designed specifically for the Apex Controller probes Built with an all acrylic weather and shatter resistant design Secured with Neodymium magnets that will hold through up to 1/2″ thick sumps

Read more less

Neptune's Double Junction ORP Probe is compatible with any monitor or controller with a BNC style connection. If you just need to replace your worn out probe or add another you will not be disappointed with the double junction feature of these probes. Most probes have a single chamber to house the actual reference probe and fluid that can become contaminated quickly throwing off readings and requiring calibration quite often. The double junction probes have two chambers that keeps any contaminants that could possibly react with and clog the actual sensing portion of the probe.   Whats Included? 1x Double Junction Lab Grade ORP probe w/ 10' cord

Read more less

DescriptionpH Probe – Lab GradeReplace your pH probe or add another for another tank, calcium reactor, etc.Buy this probe if you are:– buying an Apex Lite (it does not include a pH probe)– replacing a worn out pH probe (we recommend you replace your pH probe every 18 months).– adding another tank to your system and purchased a PM1 to do so.– want to have a back-up probe on handLab Grade Probes tend to last longer, give more accurate results, stay calibrated longer, and need replaced less frequently

Read more less

DescriptionSalinity / Conductivity Probe – Lab GradeStart measuring salinity in your tank and get alerts when out of rangeBuy this probe if you are:– Replacing an old probe– Adding salinity monitoring to your system via a PM2

Read more less

DescriptionThis probe is used in combination with the ALD module. The probe is weighted making it perfect for solid surface applications such as tile and wood floors, or inside your aquarium cabinet. This weighted version keeps the detection surfaces solidly positioned for fast detection of leaks.ALD MODULE REQUIRED TO USE

Read more less

Description DC24 10′ Extension CABLE SKU: CBL-DC24-EXT This is a ten foot Male/Female extension cable that will enable you to remotely locate DC24 accessories like the PMUP. NOTE: The maximum supported DC24 cable length between a DC24 port and the PMUP or other 24VDC device is ~20 feet

Read more less